Qlogic SANbox 3810, Interface Manual

Page: 57 / 396

Switch Configuration
Displaying Switch Information
59270-00 A 4-7
A
Security Configuration Parameters
Enter the Show Config Security command to display security configuration and
port binding parameters. These parameters determine how security is applied to
the switch. Refer to
Table 13-20 for a description of the switch security
configuration parameters. Refer to Table 13-21 for a description of the port binding
parameters.
SANbox #> show config security
Configuration Name: default
-------------------
Switch Security Configuration Information
-----------------------------------------
FabricBindingEnabled False
AutoSave True
Port Binding Status WWN
---- -------------- ---
0 True 10:20:30:40:50:60:70:80
1 True 10:20:30:40:50:60:70:80
2 False No port binding entries found.
3 True 10:20:30:40:50:60:70:80
4 True 10:20:30:40:50:60:70:80
5 False No port binding entries found.
6 True 10:20:30:40:50:60:70:81
7 False No port binding entries found.
Hardware Information
Enter the Show Chassis command to display the status of the switch hardware
including fans, power supplies, internal temperature, and Heartbeat LED status.
SANbox #> show chassis
Chassis Information
-------------------
BoardTemp (1) - Degrees Celsius 26
PowerSupplyStatus (1) Good
HeartBeatCode 1
HeartBeatStatus Normal
The HeartBeatCode and HeartBeatStatus entries indicate the Power-on Self Test
(POST) results revealed by the Heartbeat LED blink patterns. The result is normal
operation or a blink pattern indicating a critical error as described in
Table 4-1 .
Refer to the SANbox 3810 Fibre Channel Switch Installation Guide for more
information about the Heartbeat LED and its blink patterns.