manualshive.com logo in svg

Qlogic SANbox 3810, Interface Manual

Share
Download
Qlogic SANbox 3810 Interface Manual Download Page 208

Command Reference

Ipsec

13-40

59270-00  A

S

history

Displays a history of IP security modifications. This keyword does not require an 
Admin session. History information includes the following:

„

Time of the most recent IP security database modification and the user who 
performed it

„

Checksums for the active and inactive IP security databases

limits

Displays the maximum and current numbers of configured associations and 
policies. This keyword does not require an Admin session nor an Ipsec Edit 
session. However, in an Ipsec Edit session, this command displays the number of 
both configured associations and policies, plus those created in the edit session 
but not yet saved.

save

Saves changes made during the current Ipsec Edit session.

Examples

The following is an example of the Ipsec History command:

SANbox #> ipsec history

  IPsec Database History

  ----------------------

  ConfigurationLastEditedBy      johndoe@OB-session5

  ConfigurationLastEditedOn      Sat Mar  8 07:14:36 2008

  Active Database Checksum       00000144

  Inactive Database Checksum     00000385

The following is an example of the Ipsec Limits command:

SANbox #> ipsec limits

  Configured (saved) IPsec Information

  IPsec Attribute            Maximum  Current

  ---------------            -------  -------

  MaxConfiguredSAs               512        0

  MaxConfiguredSPs               128        0

Summary of Contents for SANbox 3810













































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands