Qlogic SANbox 3810, Interface Manual

Page: 33 / 396

Network Configuration
Configuring the Ethernet Port
59270-00 A 3-3
A
The network discovery method determines how the switch acquires its IP address.
The IP address can come from the IP address that resides on the switch or from a
server. The switch supports network discovery from the following server types:
„
Bootstrap Protocol (BootP)
„
Reverse Address Resolution Protocol (RARP)
„
Dynamic Host Configuration Protocol (DHCP)
To configure the IP version 4 parameters, enter the Set Setup System Ipv4
command:
SANbox (admin) #> set setup system ipv4
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
Current Values:
EthIPv4NetworkEnable True
EthIPv4NetworkDiscovery Static
EthIPv4NetworkAddress 10.20.116.133
EthIPv4NetworkMask 255.255.255.0
EthIPv4GatewayAddress 10.20.116.1
New Value (press ENTER to accept current value, 'q' to quit, 'n' for none):
EthIPv4NetworkEnable (True / False) :
EthIPv4NetworkDiscovery (1=Static, 2=Bootp, 3=Dhcp, 4=Rarp) :
EthIPv4NetworkAddress (dot-notated IP Address) : 10:20:30:40
EthIPv4NetworkMask (dot-notated IP Address) : 255.0.0.0
EthIPv4GatewayAddress (dot-notated IPv4 Address) : 10.20.30.254
Do you want to save and activate this system setup? (y/n): [n] y