Qlogic SANbox 3810 Interface Manual Download Page 350

Page: 350 / 396

Command Reference

Test Port

13-182

59270-00 A

Test Port

Tests individual ports using an offline or online test.

Authority

Admin session

Syntax

test port [port_number]

offline [loopback_type]
online

Keywords

[port_number]

The port to be tested. [port_number] can be 0–7.

offline [loopback_type]

Performs an offline test of the type given by [loopback_type] on the port given by
[port_number]. Use the

Set Port

command to place the port in the diagnostics

state before running the test. [loopback_type] can have the following values:

internal

Exercises the internal port connections.

external

Exercises the port and its transceiver. A transceiver with a loopback plug is
required for the port.

online

Exercises the port, transceiver, and device connections while the port is online.
This test does not disrupt communication on the port.

Summary of Contents for SANbox 3810













































































































































































































































































































































































































Search results

Summary of Contents for SANbox 3810

Reviews:

Brands by name

Popular brands

Qlogic SANbox 3810, Interface Manual

Search results

Summary of Contents for SANbox 3810

Reviews:

Brands by name

Popular brands