manualshive.com logo in svg

Qlogic SANbox 3810, Interface Manual

Share
Download
Qlogic SANbox 3810 Interface Manual Download Page 48

Network Configuration

Managing IP Security

3-18

59270-00  A

S

Renaming a User-Defined Association

To rename a user-defined association (associaton_1), enter the 

Ipsec Association

Rename command as shown in the following example:

SANbox #> admin start

SANbox (admin) #> ipsec edit

SANbox (admin-ipsec) #> ipsec association rename association_1 association_4

  The security association will be renamed. Please confirm (y/n): [n] y

SANbox (admin-ipsec) #> ipsec save

  The IPsec configuration will be saved and activated.

  Please confirm (y/n): [n] y

Copying an Association

You can copy both user-defined and dynamic associations. To copy an 
association (association_1), enter the 

Ipsec Association

 Copy command as 

shown in the following example:

SANbox #> admin start

SANbox (admin) #> ipsec edit

SANbox (admin-ipsec) #> ipsec association copy association_1 association_a

SANbox (admin-ipsec) #> ipsec save

  The IPsec configuration will be saved and activated.

  Please confirm (y/n): [n] y

Resetting the IP Security Configuration

Resetting the IP Security configuration deletes all policies and associations from 
the switch. There are two ways to do this. Within an Ipsec Edit session, enter the 

Ipsec

 Clear command, then save the changes as shown in the following example:

SANbox #> admin start

SANbox (admin) #> ipsec edit

SANbox (admin-ipsec) #> ipsec clear

SANbox (admin-ipsec) #> ipsec save

  The IPsec configuration will be saved and activated.

  Please confirm (y/n): [n] y

Summary of Contents for SANbox 3810













































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands