Configuring the MVI56-PDPMV1 Module
MVI56-PDPMV1 ♦ ControlLogix Platform
User Manual
PROFIBUS DPV1 Master
Page 88 of 251
ProSoft Technology, Inc.
6
Double-click the
S
LAVE
icon to view the
Slave Properties
.
PCB automatically assigns a PROFIBUS address to each new slave. The
address assignment begins at address
3
, and is incremented by 1 for each
new slave added to the network. You can change the address in the
Common
tab of the
Slave Properties
dialog box. PCB will not allow you to
assign a PROFIBUS address that is already in use by another device on this
network.
Leave the remaining settings unchanged for now, and click
OK
to close the
Slave Properties
dialog box.
7
Repeat steps 2 through 6 for all slaves you intend to place on the network.
8
When you are finished adding slaves, open the
P
ROJECT
menu and choose
E
XIT
. Click
Y
ES
to save the project and return to the
PROFIBUS Master
Setup
dialog box.
