![background image](http://html1.mh-extra.com/html/pronto/magicard-3649-0001/magicard-3649-0001_maintenance-manual_1617575088.webp)
Ultra Electronics Ltd
Pronto Maintenance Manual
- 88 -
24:09
This error is raised while trying to hand feed a Card into the print Engine if the Printer sees the mid
Sensor block before the front one clears. This could possibly indicate that the front Sensor has failed,
or that the mid Sensor is faulty.
24:10
This error is raised while trying to hand feed a Card into the print Engine if the Printer sees the rear
Sensor block before the front one clears and the mid one blocks. This could possibly indicate that the
front Sensor has failed, and that the mid Sensor has dropped out of position, or that the rear Sensor
is faulty.
24:11
This error is raised while trying to hand feed a Card into the print Engine if the Printer sees the rear
Sensor block before the mid one does. This could possibly indicate that the mid Sensor has dropped
out of position, or that the rear Sensor is faulty.
24:12
This error is raised while attempting to write a downloaded Firmware file into ash memory if the
encrypted checksum of the file is invaLid. This would mean that the Firmware file has been either
corrupted during transmission, or modified by a third party.
24:13
This error is raised while attempting to move the Card into the standby position if the Firmware data
relating to the current position of the Card is invaLid. This should never happen.
24:15
This error is raised in Pronto Engines while hand-feeding a Card to the standby position, while trying
to block the front Sensor, if the rear Sensor blocks first.
24:16
This error is raised in Pronto Engines while hand-feeding a Card to the standby position, while trying
to block the front Sensor, if the mid Sensor blocks first.
24:18
This error is raised if the UNEXPIRE command fails.
25 - CALIBRATE FAILED
Could not calibrate the Dye-Film LEDs.
25:00
25:00
This error is raised while calibrating the Dye LED if the cluster analysis is unable to find the black
panel. This means that light was always able to shine through the Film, regardless of which panel the
Printer was looking at.
25:01
This error is raised while calibrating the Dye LED if the Printer never sees either green or blue light
shine through the Film, regardless of which part of the Film it looks through. (Note that the Printer
was able to see red light shine through).
25:02
This error is raised while calibrating the Dye LED if the Printer never sees blue light shine through the
Film, regardless of which part of the Film it looks through. (Note that the Printer was able to see red
and green light shine through).
25:03
This error is raised while calibrating the Dye LED if the Printer never sees red, green or blue light
shine through the Film, regardless of which part of the Film it looks through.
25:04
This error is raised while calibrating the Dye LED if the Printer never sees red or blue light shine
through the Film, regardless of which part of the Film it looks through. (Note that the Printer was
able to see green light shine through).