Ultra Electronics Ltd
Pronto Maintenance Manual
- 77 -
SECTION 18
FIRMWARE RELEASE HISTORY
Introduction
This is the amendment record for the Magicard Pronto printer Firmware (Software Identifcation Number
2221). This document is updated whenever a new version of the Firmware is released.
6-Oct-2009 | Release V1.09
1. Re-release of previous version due to Compiler fault.
6-Oct-2009 | Release V1.07
1. Updated the executable Firmware updater. This now handles multiple Printers connected at once.
23-Sep-2009 | Release V1.06
1. Added some extra debouncing to the sensor signal from the encoding module.
2. Updated dye LED calibration process to permit the use of either 5 or 6 panel Film.
3. Fixed soft power-off.
3-Sep-2009 | Release V1.05
1. Fixed a misregistration issue which affects some machines when photographs are printed against
primary colour backgrounds.
2. Leave fan on for longer for the 'RUNFAN' diagnostic command.
12-Aug-2009 | Release V1.04
1. Printer now avoids unnecessary Film usage when waking from sleep mode.
2. Reduced the occurrence of a resin line where the Head is dropped onto the Card.
3. Fixed problem where Firmware version was not being displayed corectly in the Printer query.
23-Jun-2009 | Release V1.03
1. Ensure printhead fan is switched off while waiting for the printed card to be removed from the exit slot.
2. Improved Resin Black printing method.
3-Jun-2009 | Release V1.02
1. Reduce the occurrence of a rogue Black Resin line.
2. Fixed bug in which sometimes caused the first Card to be blank when printing Resin-only images.
26-May-2009 | Release V1.01
1. Improved Print Head temperature control during Overcoat panel.
22-May-2009 | Release V1.00
1. Initial production release.
