Ultra Electronics Ltd
Pronto Maintenance Manual
- 44 -
SECTION 11.11
REMOVAL OF THE CHASSIS COVER
The Chassis cover can be removed from the main Print Engine, however there are no user replaceable parts inside.
Chassis Cover Removal
1.
Release the front Lid catch so the Lid is partially open.
2.
Release the plastic locking Tabs arrowed directly above.
3.
Lift the complete Chassis cover upwards away from the Print Engine.
4.
Remove the wire loom from the left hand side of the Printer (noting how it is fed
through the plastic).
Refitting is the reverse procedure ensuring no wires are trapped and the Lid opens
and closes freely.