![background image](http://html1.mh-extra.com/html/pronto/magicard-3649-0001/magicard-3649-0001_maintenance-manual_1617575043.webp)
Ultra Electronics Ltd
Pronto Maintenance Manual
- 43 -
SECTION 11.10
REMOVAL & REFITTING OF THE DRIVE MOTORS & FRONT CARD SENSOR.
Cam Motor.
1.
Disconnect the Motor connections.
1.
The Motor is held in place by two screws, remove these screws.
2.
Remove the Motor out through the bottom of the Print Engine.
Refitting is the reverse procedure ensuring the Motor aligns with the
screw holes.
Card Drive Motor.
1.
Disconnect the Motor connector.
2.
The Motor is held in place by two screws through elongated
holes. The elongated holes provide movement for Belt tension.
Remove these screws.
3.
Remove the Motor out through the bottom of the Print Engine.
Refitting is the reverse procedure but leave the screws loose until the
main Drive Belt is fitted and tensioned.