![background image](http://html1.mh-extra.com/html/pronto/magicard-3649-0001/magicard-3649-0001_maintenance-manual_1617575040.webp)
Ultra Electronics Ltd
Pronto Maintenance Manual
- 40 -
SECTION 11.6
REMOVING & REFITTING OF THE FRONT & REAR CARD SENSOR
Removal & Refitting of the Front & Rear Card Sensor
1.
Working inside the printing compartment, the front and rear card Sensor plastic clips can be released. The plastic clips are situated adjacent to
the Card path at the front and rear of the printing area.
2.
Withdraw the two plastic clips and Card Sensors from underneath the machine. The Card Sensor PCB’s can now be disconnected from the
wiring.
Refitting is the reverse procedure.
Middle Card Sensor cannot be
removed at this point, refer to
Section 11.17 to remove.