Promax HD Ranger + User Manual Download Page 87

Page: 87 / 224

December 2014

7-79

The following describes the

Attenuation Test

screen:

Figure 48.

Installation selected, date and time.

Selected band; battery level.

Status message depending on the attenuation level.

Power level of the signal.

Signal Frequency (MHz).

Power level of the reference signal obtained when setting the reference
and used to calculate the attenuation level (dBµV).

Power level of the test signal at the user access point (dBµV).

Attenuation level (dB); Attenuation = Reference – Current.

Softkeys.

X-axis

: Pilot signals

Y-axis

: Power

►

Joystick

: The joystick does not have any function in this tool.

Summary of Contents for HD Ranger +

































































































































































































































Search results

Summary of Contents for HD Ranger +

Reviews:

Related manuals for HD Ranger +

Brands by name

Popular brands

Promax HD Ranger +, User Manual

Search results

Summary of Contents for HD Ranger +

Reviews:

Related manuals for HD Ranger +

Brands by name

Popular brands