Promax HD Ranger +, User Manual

Page: 110 / 224

7-102 December 2014
7.13 Field Strength
7.13.1 Description
This function allows the equipment to work as a field strength meter, measuring
dBµV per meter. To perform this type of measurement is needed to enter the
calibration parameters of the antenna being used to receive the signal.
7.13.2 Operation
The Field Strength tool is available for all signals received by the RF input.
Connect the antenna to the RF input of the equipment.
Select a channel or frequency.
Press the Tools key.
Select the Field Strength option and in the drop down menu select
On .
Select again the Field Strength option, now select the new option that
appears, called Configuration .
In the configuration window enter the antenna calibration parameters,
by hand or selecting one of the available antenna types (data of
different antenna types should be imported by the user. Refer to the
following section).
Now access the Spectrum Analyser or Measurement mode to check
the field strength measure shown as FSM (dBµV/m). This measure
replaces the power.