December 2014
6-57
In case of tuning by channel, it allows selecting a channel from the active
channel plan:
Place over the
Channel
option and press the joystick.
A box appears with all channels of the active channel plan and its
frequency.
Move the joystick on the box to select a channel.
When finished press joystick to save the selected value or any function
key to exit without saving.
The cursor will place on the selected channel and it will appear on the
option.
When using tune by channel on satellite, the polarity parameters
(horizontal/vertical and left/right) and satellite band (high/low) are selected
automatically by the equipment, according to the channel plan enabled and
cannot be changed by the user. To change these parameters, the user may
switch to frequency tuning. But the user can change the voltage output
while in a channel plan, as long as none has been defined in that same
channel plan. For instance, if a standard channel plan is being used like the
CCIR, there is now need for switching to frequency tuning mode or make
special channel plans for using active antennas.
The channel can be changed directly with the joystick in CH mode.
In case of
tuning by frequency
, the frequency can be edited:
Place over the
Frequency
option and press the joystick.
The option is highlighted in yellow to indicate it is in edit mode.
Move the joystick left/right to move between the figures and up/down
to change the figure.
When finished press joystick to save the selected value or any function
key to exit without saving.
The frequency can be changed directly with the
joystick in
FR
mode.
Summary of Contents for HD Ranger +
Page 1: ...HD RANGER TV SATELLITE ANALYSER 0 MI1914...
Page 15: ...December 2014 2 7 2 3 Equipment Details Front View Figure 4...
Page 16: ...2 8 December 2014 Lateral view Figure 5 Top view Figure 6 Optical Option Refer to annex...
Page 22: ...2 14 December 2014 INSTALLATIONS MANAGEMENT PREFERENCES MENU Figure 7...
