December 2014
2-23
Then, the user only has to follow these steps in order to identify a signal:
Press
the
Preferences
key
for 1 second.
In
the
StealthID
tab, select the signal types to auto-identify (see "Menu
tree"
figure 7
). By default all them are selected. Press the
key to save
the changes made and the
key to exit the
Preferences
screen.
Press the
Settings
key.
Select the band (terrestrial or satellite).
Select a channel or frequency to identify.
The bottom of the screen shows the message "
Searching for signal
" and
the standard transmission checking. Wait a few seconds for the equipment
to identify the signal. User can force the auto-identification of a signal by
pressing the
key and selecting the type of signal from the menu.
When the equipment identifies the signal a text shows the detected signal
type.
Press (Signal Parameters) to see the signal parameters.
Summary of Contents for HD Ranger +
Page 1: ...HD RANGER TV SATELLITE ANALYSER 0 MI1914...
Page 15: ...December 2014 2 7 2 3 Equipment Details Front View Figure 4...
Page 16: ...2 8 December 2014 Lateral view Figure 5 Top view Figure 6 Optical Option Refer to annex...
Page 22: ...2 14 December 2014 INSTALLATIONS MANAGEMENT PREFERENCES MENU Figure 7...
