December 2014
9-119
Press the
Spectrum
key
to access the Spectrum analyser mode.
Press the
Settings
key
and select the satellite band.
Select the polarization (horizontal/vertical) and the satellite band
(high/low).
If necessary, enable the
Supply output
and select the supply voltage
for the LNB.
In the option SatCR, select ON to enable it. It appears the
icon at
the top right corner.
Also in the SatCR option, select Configuration to access SatCR
parameters.
Figure 72
. SatCR command screen.
The configuration window shows the options that user can modify:
number of slots, slot selected, device address, pilot signal activation
(when activating the SatCR device located in the headend, it emits a
pilot signal with constant level for each downlink frequency to
identificate available channels), selected satellite and frequency step.
For each type of slot number unit there is a list of independent
frequencies to select. The user may have separate frequencies for 2, 4
or 8 slots units and these values are not lost when switching from one
type to another.
Summary of Contents for HD Ranger +
Page 1: ...HD RANGER TV SATELLITE ANALYSER 0 MI1914...
Page 15: ...December 2014 2 7 2 3 Equipment Details Front View Figure 4...
Page 16: ...2 8 December 2014 Lateral view Figure 5 Top view Figure 6 Optical Option Refer to annex...
Page 22: ...2 14 December 2014 INSTALLATIONS MANAGEMENT PREFERENCES MENU Figure 7...
