Promax HD Ranger + User Manual Download Page 84

Page: 84 / 224

7-76

December 2014

The following describes the

SPECTROGRAM

screen:

Figure 47.

Selected installation; date and time.

Measurement values for the signal tuned at the frequency/channel
selected.

Spectrum over time at the selected span.

Softkeys menus.

Selected band, battery level.

Maximum and minimum values of signal power and band power over
time.

Maximum and minimum value of the measure selected by the user in the
option "User measure".

Elapsed

time.

Signal status (searching / locked / multiplex name / selected span).

X Axis

: Span (MHz)

Y Axis

: Power

►

Joystick does not have any function in this tool.

Summary of Contents for HD Ranger +

































































































































































































































Search results

Summary of Contents for HD Ranger +

Reviews:

Related manuals for HD Ranger +

Brands by name

Popular brands

Promax HD Ranger +, User Manual

Search results

Summary of Contents for HD Ranger +

Reviews:

Related manuals for HD Ranger +

Brands by name

Popular brands