4-46
December 2014
4.7
Satellite Identification
The spectrum analyser makes easier the fieldwork for engineers when working
with SNG mobile units and VSAT communications, since it allows adjusting
transmission-reception systems. It also has several functions to identify satellites
that avoid any possibility of error. When the signal is locked it identifies the
satellite and shows on screen its name.
Often satellite operators request to look for the "Beacon" signal, as a method of
satellite identification. This signal is easily identified by the equipment, because it
has high resolution, high sensitivity and short sweep times.
Below are two BEACON screenshots signals, with a span of 10 MHz and a
bandwidth of 100 kHz resolution, all with a sweep time of 90 ms.
Figure 33.
Figure 34.
More data for installations with satellite signals in annex "How to point a dish
antenna."
Summary of Contents for HD Ranger +
Page 1: ...HD RANGER TV SATELLITE ANALYSER 0 MI1914...
Page 15: ...December 2014 2 7 2 3 Equipment Details Front View Figure 4...
Page 16: ...2 8 December 2014 Lateral view Figure 5 Top view Figure 6 Optical Option Refer to annex...
Page 22: ...2 14 December 2014 INSTALLATIONS MANAGEMENT PREFERENCES MENU Figure 7...
