Promax HD Ranger +, User Manual

Page: 4 / 224

SAFETY RULES
*
The safety could not be assured if the instructions for use are not closely
followed .
*
Use this equipment connected only to systems with their negative of
measurement connected to ground potential .
*
The AL-103 external DC charger is a Class I equipment, for safety reasons plug it
to a supply line with the corresponding ground terminal .
*
This equipment can be used in Overvoltage Category I installations and
Pollution Degree 2 environments.
External DC charger can be used in Overvoltage Category II , installation and
Pollution Degree 1 environments .
*
When using some of the following accessories use only the specified ones to ensure
safety.:
Rechargeable battery
External DC charger
Car lighter charger cable
Power cord
*
Observe all specified ratings both of supply and measurement.
*
Remember that voltages higher than 70 V DC or 33 V AC rms are dangerous.
*
Use this instrument under the specified environmental conditions .
*
When using the power adaptor, the negative of measurement is at ground
potential.
*
Do not obstruct the ventilation system of the instrument .
*
Use for the signal inputs/outputs, specially when working with high levels,
appropriate low radiation cables.
*
Follow the cleaning instructions described in the Maintenance paragraph.