Promax HD Ranger +, User Manual

Page: 98 / 224

7-90 December 2014
►
To start the datalogger:
After creating a new datalogger file or selecting an existing one, the
user can start the datalogging process.
From the datalogger viewer screen, press the "Test point" key and
from the menu select an existing test point using the "Jump to ..."
option or "Create new ..." to create a new test point. If a new test
point is created, user has to give it a name.
Figure 58.
Now datalogger is ready to start. Press the "Datalogger" key
and
select "Start". The datalogger process starts, during which all the
measurements of all channels that are part of the datalogger and also
the attenuation test are saved.
During datalogger, it catches the list of available services of all
channels in the channel plan that are part of the datalogger (if this
option was selected when creating the datalogger or if the "Datalogger
PSI" option is enabled in the Preferences menu). If there is a change
of channel plan during datalogger there will be a pause (if this option
was selected when creating the datalogger). User can pause and
resume the datalogger process at any time by pressing on the key
"Pause"
. If the "Attenuation Test" option was included when
creating the datalogger, these measures will also saved.