Configuring Your I/O
1. Click on Song | Song Setup to set your sample rate and resolution and configure your audio I/O.
2. Click on the Audio I/O Setup tab.
3. From the Inputs tab, you can enable the inputs for your Revelator Dynamic, including the Loopback
Inputs that you’d like to have available. We recommend you create a mono input using Input 1 of your
Revelator Dynamic and two Stereo Inputs; one for Mix B L/R and another for Mix C L/R. These cor-
respond to Virtual A and Virtual B respectively.
Configuring Your I/O
93
