l
Always on Top.
Keeps the Universal Control Launch window on top whether it is the currently active
application or not.
l
Run at Startup.
Launches Universal Control automatically when your computer boots.
l
Preferences.
Sets language and appearance options (see below).
l
Rescan Network.
Scans your computer’s connections for all supported PreSonus products.
l
Language.
Sets the language (English, French, German, Korean, Simplified Chinese, or Spanish).
Power User Tip:
The Launch Window will inform you when a new firmware update is available for your Revel-
ator Dynamic—or other PreSonus hardware!
3.2
Using Your Revelator Dynamic with Popular Applications
If you’ve never used an audio interface, your computer and every application on it are currently sourcing
audio from the built-in microphone and routing audio out to the onboard sound card. To use Revelator
Dynamic with any application that can access audio inputs or outputs or both, you must first set up your
computer to use Revelator Dynamic as an audio interface.
This section will take you through some of the most common use cases. If you are using an application
not listed in this section, you’ll need to check with the documentation that came with it.
3.2.1 Using Revelator Dynamic for System Audio
The easiest way to make your Revelator Dynamic seen by just about any application on your computer is
to set it up as the default sound source for your computer. Not only will this prompt most video con-
ferencing and streaming applications to look for Revelator Dynamic, it will also set your default Internet
browser to use Revelator Dynamic as well.
3.2 Using Your Revelator Dynamic with Popular Applications
23
