POWERSYS RECLOSER, Manual

Page: 63 / 87

- 57 -
<Table 5-21> DNP Config
The way to set is identical with 5.3.1
5.4.4. IEC101 Config
It is a menu to set IEC870-5-101 communication related item.
<Table 5-22> IEC101 Config
The way to set is identical with 5.3.1
Item Range Default Step Unit Explanation
D/L Retry 0~2 0 1 Set the number of data link layer retry
D/L Timeout 1~255 3 1 s Set data link layer timeout
D/L Confirm
NO/YES/
SOMETIME
SOMETI
ME
Choose if data link layer ask confirm is used
A/L Retry 0~2 0 1 Set the number of application link layer retry
A/L Timeout 1~255 10 1 s Set application layer timeout
Unsol Resp Class NO/YES NO
After power on, choose if unsolicited response
is set
Unsol Resp Delay 0~60 1 1 s Unsolicited response delay time setting
Unsol Resend Dly 0~60 1 1 s Unsolicited response delay time setting
SBO Timeout 1~255 5 1 s
After selection, if set timeout is over for
operation order, select is lifted
Master Addr 0~65534 65534 1 Upper master’s address setting
Frame Interval 10~500 20 10 ms
If D/L timeout confirm is NO, choose link
frame’s interval
DNP Port Num 0~65534 20000 1 Set DNP-TCP Port Num
Cls Evt when RST
Disable/Enabl
e
Disable
Select whether Clear Event when Reset
function is available
Event Time Sync
Disable/Enabl
e
Disable
Select whether Event Time Sync function is
available
BI Chg Dflt Var
With
time/Without
time
Without
time
Select whether with time or without time
AI Chg Dflt Var
With
time/Without
time
Without
time
Select whether with time or without time
Item Range Default Step Unit Explanation
Link Addr Size 0~2 2 1 Data link address size
Common Addr Size 1~2 2 1 Common address size
IOA Size 1~3 2 1 Information object address size
COT Size 1~2 1 1 COT address size
Time Format CP24/CP56/NO CP56
Select Time Fomat, CP24, CP56
or NO
Single Char N/ACK Disable/Enable Disable
Set character ACK, NACK
information
Arm Timeout 1~255 5 1 s
Set arm timeout
Analog Data Type
NORMAL/SCALE
/FLOAT
NORMAL Set analog data type
Scan Analog Chg Disable/Enable Disable
Set scan analog change
information
Scan Binary Chg Disable/Enable Disable
Set scan binary change
information