PowerBoss Admiral 48D, Instruction Manual

Page: 49 / 120

49
Operation
If optional accessories are not
assembled, the corresponding
buttons have no function.
Button for agitating device
(Fig.
22/2)
This button serves to switch
an agitation process on and
off, whereby the filter system
on the pre-sweep/vacuum
unit is cleared of the dust attached.
After pressing the button, an agitation
process runs for approx.
6 seconds in
intervals; press the button again to end
the process prematurely. Alternatively
to pressing the button, you can turn the
key switch to position 0 and 1 (RESET).
Button for extractor fan
(Fig.
22/3)
This button serves to switch
the extractor fan of the filter
system on and off. The filter
system is part of the pre-
sweep/vacuum unit.
Button to switch the pre-
sweep/vacuum unit on and
off
(Fig.
22/4)
This button is used to switch
the pre-sweep/vacuum unit on and off.