PowerBoss Admiral 48D, Instruction Manual

Page: 21 / 120

21
Starting Up
Assembling the middle brush or
middle pad
1. Open the deflector (Fig. 5/1), refer to
paragraph ”Opening and closing the
deflector”.
2. If necessary, remove the brushes or
pads already installed, refer to
paragraph ”Disassembling the outer
brushes
/ pads” and paragraph
”Disassembling the middle brush or
middle pad”.
3. Position the middle brush (Fig. 7/2)
or middle pad (Fig. 7/5) as illustrated
in Fig. 7 on the assembly tool
(Fig. 7/1).
The correct side of the plate of
the assembly tool must point
upwards, refer to paragraph
”Assembly tool”.
4. Take hold of the assembly tool
(Fig. 7/1) at the narrow end and slide
the brush (Fig. 7/2) or pad (Fig. 7/5)
under the middle brush catch
(Fig.
7/4).
Fig. 7
5
1 2
4
1
1
3