PowerBoss Admiral 48D, Instruction Manual

Page: 75 / 120

75
Maintenance and Service
5 Maintenance and
Service
General information
It is essential to pay attention
to the information in Chapter
"Safety Information" before
completing any service or
maintenance work!
By adhering to the maintenance work
recommended by us, you can be sure
that the vehicle is always ready to be
put into operation.
Maintenance and repair work
necessary on a daily and weekly basis
can be carried out by a driver trained to
complete the work, all other PowerBoss
system maintenance may only be
completed by personnel who are
correspondingly qualified and trained.
In case of doubt, please contact your
nearest PowerBoss service center or
authorized PowerBoss dealer. Failure
to observe this annuls any rights to
claims under the terms of guarantee in
respect of resulting damage or
consequential damage.
Always specify the serial number,
indicated on the rating plate, when
making any inquiries and orders for
spare parts, refer to Section 1.7.
5.1 PowerBoss system
maintenance
PowerBoss system maintenance:
• ensures the PowerBoss working
vehicle is always ready for operation
(preventive maintenance),
• minimizes operating costs,
maintenance and repair costs,
• ensures the vehicle has a long
service life.
The PowerBoss system maintenance
describes the specific technical work
necessary for the individual modules
and defines the intervals for the
maintenance tasks. Individual parts
which must be changed during
maintenance tasks are defined and
stipulated in spare parts kits.
PowerBoss system maintenance,
customer:
Work to be carried out by the customer
according to the service and
maintenance instructions in the
operating manual (daily and weekly).
Operating personnel are given the
necessary instruction by specialists
when the vehicle is delivered.
PowerBoss system maintenance I:
(Every 250 operating hours or at least
once a year)
Must be completed by a skilled
technician in an authorized PowerBoss
service center according to the vehicle-
specific system maintenance with a
spare parts kit.
PowerBoss system maintenance II:
(Every 500 operating hours or at least
once a year)
Must be completed by a skilled
technician in an authorized PowerBoss
service center according to the vehicle-
specific system maintenance with a
spare parts kit.
PowerBoss system maintenance
III/S:
(Safety check, every 1000 operating
hours or at least once a year)
Must be completed by a skilled
technician in an authorized PowerBoss
service center according to the vehicle-
specific system maintenance with a
spare parts kit.