PowerBoss Admiral 48D, Instruction Manual

Page: 57 / 120

57
Operation
3.3.2 Accelerating
• Set the required driving direction
with the direction switch: set the
switch to the front to drive forward,
set the switch to the rear to reverse.
• Release the parking brake, refer to
"Safety catch" in Section 3.2.1.
• Press the accelerator down slowly
with your right foot until you reach
the required driving speed.
3.3.3 Stopping and parking
• Remove your right foot from the
accelerator to slow down. When the
foot is fully removed from the
accelerator, the vehicle rolls to a
stop.
• Now press the right foot on the
service brake pedal to stop the
vehicle and bring it to a stop.
• Turn the key in the key switch
counterclockwise to lock position 0
and remove the key.
• Press the left foot on the parking
brake pedal to park the vehicle.
Always apply the parking brake
and remove the key before
getting out of the vehicle!
3.3.4 Cleaning
If the hand-held vacuum cleaner or
spray/vacuum tool option is assembled,
there are a total of six cleaning
programs available for selection:
1. Sweeping
2. Sweeping, wet scrubbing and
vacuuming dry
3. Wet scrubbing and vacuuming dry
4. Wet scrubbing (basic cleaning)
5. Vacuuming dry
6. Working using the additional
scrubbing and vacuuming tool
(spray/vacuum tool) / vacuuming
with the suction hose (option)
The cleaning programs are activated
via the left-hand operating panel, refer
to Section
3.2.2. Press the relevant
button as soon as the scrubber-drier is
ready to operate (see above).