PowerBoss Admiral 48D, Instruction Manual

Page: 20 / 120

20
Starting Up
Assembly sequence
Assemble the middle brush or pad first
and then mount the outer
brushes/pads.
Disassembly sequence
The outer left brush or pad must be
disassembled before the middle brush
or pad can be disassembled.
Disassemble the middle brush
or pad preferably from the left-
hand side of the vehicle
because the guiding aid for the
assembly tools is located here.
Assembly tool
To simplify assembly and disassembly
of the middle brush or pad in particular,
an assembly tool (Fig.
6/4) is provided
which is kept in a corresponding holder
(Fig.
6/3) under the seat console which
can be opened out.
Both sides of the plate (Fig. 6/1) of the
assembly tool (Fig. 6/4) can be used:
• To assemble brushes, the flat side of
the plate (Fig. 6/1) (without centering
device (Fig. 6/6)) must point
upwards.
• To assemble pads, the side of the
plate (Fig. 6/1) with the centering
device (Fig. 6/6) must point
upwards.
There are pins (Fig. 6/2) on
both sides of the plate
(Fig.
6/1) which serve to center
the brush or pad on the
assembly tool.
Turn the plate:
1. Remove the screw (Fig.
6/5).
2. Remove the plate (Fig. 6/1) from the
dowel (Fig. 6/7).
3. Turn the plate (Fig. 6/1) over.
4. Fit the plate (Fig. 6/1) upside down
on the dowel (Fig. 6/7).
5. Insert and tighten the screw
(Fig. 6/5).
The assembly tool (Fig. 6/4)
can be used to assemble and
disassemble all the brushes or
pads.
Fig. 6
3
6
7
1
4
5
2
2
2
2
2
1