PowerBoss Admiral 48D, Instruction Manual

Page: 60 / 120

60
Operation
Vacuuming with the suction hose
The suction hose is an optional
accessory and part of the
spray/vacuum tool function.
When the suction hose is in
operation, the scrubber drier's
parking brake must be applied.
Vacuuming with the suction
hose only works when the
operator is not seated on the
driver's seat (seat contact
switch is not actuated) and the
parking brake is applied.
1. Press the “Button to
switch the fresh water
supply on and off”
(Fig.
21/14) on the left-
hand operating panel to
switch the water on and
off.
2. Press the “Button for
squeegee and suction
turbine” (Fig.
21/10) on
the left-hand operating
panel to switch the
suction turbine on and
off.
The squeegee remains raised.
Useful tips for cleaning
• Sweep the floor before starting wet
cleaning. This not only improves the
cleaning effect but also reduces the
vehicle's liability to wear.
• The floor should be treated twice in
the case of particularly dirty floors or
to remove wax (basic cleaning).
- During the first cleaning process,
the floor is scrubbed with a
cleaning agent dosage appropriate
to the degree of soiling, whereby
the squeegee is raised.
- Let the cleaning solution work into
the floor for 5 to 10 minutes
according to the manufacturer's
information.
- Then scrub the floor again with the
squeegee lowered.
• Observe the correct dosage of the
cleaning agent. Information on
dosage is provided on the cleaning
agent container.
• Use the manufacturer's information
as an initial basis. Practical
experience will ensure that you
quickly find out which is the right
PowerBoss cleaning agent and the
optimum dosage to suit your needs.