PowerBoss Admiral 48D, Instruction Manual

Page: 62 / 120

62
Operation
3.4 After finishing work
1. Drive to a suitable service or parking
area.
An appropriate service and
parking area must have a solid
floor, have a roof and ensure
that no hazardous substances
(e.g. oils, battery acid, cleaning
agents, etc.) can get onto the
floor or in the sewage system.
2. Stop the vehicle and switch it off.
Before getting out of the
vehicle apply the parking
brake, switch off the key switch
and remove the key.
Check that the working lights
are switched off.
The working lights can be
switched on even when the
vehicle is switched off and,
thus, drain the battery.
3. Empty and clean the recovery tank,
refer to Sections 5.6.1 and 5.6.2.
Observe the applicable laws
and local regulations when
disposing of cleaning agents.
4. Check the fresh water filter, refer to
Section 5.5.4.
5. Check the sealing strips and suction
hose, refer to Section 5.8.
6. Check the electrical equipment,
functions and settings.
7. Clean the vehicle, refer to Section
5.12.
It is not permitted to clean the
vehicle with a pressure washer
or steam blaster.
8. Charge the batteries, refer to Section
5.4.1.
The seat console must remain
open during the charging
process (otherwise there is a
risk of oxyhydrogen
developing).
If the machine is to be
shutdown for a longer period,
the fresh water tank must be
emptied.