PowerBoss Admiral 48D, Instruction Manual

Page: 109 / 120

109
Maintenance and Service
Disassembling the cylindrical brush
The cylindrical brush can only be
accessed from the right-hand side of
the vehicle.
Fig. 41
1 Knurled screw for brush swing arm
2 Knurled screw for
brush space cover
3 Brush space cover
4 Brush swing arm
1. Sit on the driver's seat, insert the key
in the key switch and turn to
position 1.
2. Press the “Button to switch the pre-
sweep/vacuum unit on and off”
(Fig.
22/4) to lower the side brush
and cylindrical brush.
3. Turn the key switch to position 0 and
remove the key. The cylindrical
brush and side brush remain
lowered.
4. Unscrew the knurled screw for the
brush swing arm (Fig. 41/1).
5. Pull off the brush swing arm
(Fig. 41/4).
6. Unscrew the knurled screw for the
brush space cover (Fig. 41/2).
7. Remove the brush space cover
(Fig. 41/3).
8. Pull the cylindrical brush out.
Installing the cylindrical brush
The cylindrical brush must be installed
in the reverse sequence to
disassembly, refer to paragraph
”Disassembling the cylindrical brush”.
2
3
1
4