PowerBoss Admiral 48D, Instruction Manual

Page: 65 / 120

65
Operation
3.5.2 Other function faults
The vehicle does not work
Check the fuses, refer to Section
5.11.3.
In the event of faults in the
traction drive, stop the vehicle
immediately, apply the parking
brake and remove the key!
Error code Fault Cause Solution
2.2.6.2 Cylindrical brush holding
attachment has been
switched off because the
anti-blocking system has
been tripped.
Foreign bodies (e.g. tape or
such) between the cylindrical
brush and machine.
Check the cylindrical brush holding
attachment for foreign bodies, remove
them as necessary.
2.3.6.1 The left side brush remains
stopped because the anti-
blocking system has been
tripped.
Foreign bodies (e.g. tape or
such) block the side brush.
Check the side brushes for foreign bodies
and remove them, as necessary.
2.3.6.2 The right-hand side brush
remains stopped because
the anti-blocking system has
been tripped.
Foreign bodies (e.g. tape or
such) block the side brush.
Check the side brushes for foreign bodies
and remove them, as necessary.
3.4.5.1 Drive motor is too hot /
Drive motor switches to 50%
power output.
• Engine is overloaded, possibly
after driving up slopes.
• Parking brake was actuated
while driving.
• Allow the motor to cool down.
• Check whether the parking brake is
applied and release it, if necessary.