Page 66 of 89
(PVI-6000-OUTD-xx-AU Rev:1.0)
The display has 2 lines; use the keys at the side of the display to scroll through
items or open the corresponding submenus.
An arrow on left side of the display highlihghts your current selection. When
chosen item is selected, press ENTER to open the submenu.
As soon as test is selected, the display shows
During the test the display gives test progress indication.
If test is passed, depending on selected item, the display shows:
V= measured voltage; T= time necessary to take the measurement
F= measured frequency; T= time necessary to take the measurement
While if test is failed, the following will be displayed:
V= measured voltage; T= time necessary to take the measurement
F= measured frequency; T= time necessary to take the measurement
5.5.6.10 Alarm
The inverter features an alarm function that opens or closes a relay contact, access
can be gained through front door as indicated in Fig. 22. This contact can be used
for instance to activate a siren or a visual alarm in case inverter is disconnected
from the grid (no energy output) or for any alarm event generated by the system.
This function can activate two alarm modes. Press ENTER to open the relevant
submenu:
Test I=…. mA
OK
T= ….ms
Test I=…. mA
Fail
T= ….ms
Test F=…. Hz
Fail
T= ….ms
Test F=…. Hz
OK
T= ….ms
Test V= …. V
Fail
T= ….ms
Test V= …. V
OK
T= ….ms
Test in progress
………………..
Summary of Contents for AURORA PVI-6000-OUTD-AU Series
Page 16: ...Page 16 of 89 PVI 6000 OUTD xx AU Rev 1 0 Fig 3C Integrated switch and diodes models...
Page 39: ...Page 39 of 89 PVI 6000 OUTD xx AU Rev 1 0 Fig 18 Data Transmission Options...
Page 70: ...Page 70 of 89 PVI 6000 OUTD xx AU Rev 1 0...
Page 88: ...Page 88 of 89 PVI 6000 OUTD xx AU Rev 1 0 CERTIFICATE OF CONFORMITY...
