Page 18 of 89
(PVI-6000-OUTD-xx-AU Rev:1.0)
The block diagram shows an AURORA PVI-6000-OUTD with two independent
input DC-DC converters; each converter is dedicated to a separate array with
independent Maximum Power Point Tracking (MPPT) control. This means that the
two arrays can be installed in different positions and orientations. Each array is
controlled by an MPPT control circuit.
Thanks to its high efficiency and generously sized heat sink, the AURORA
inverter provides maximum power operation in a broad range of ambient
temperatures.
The inverter is controlled by two independent DSPs (Digital Signal Processors)
and one central microprocessor.
This way, grid connection is controlled by two independent computers in full
compliance with electrical power supply and safety regulations.
Aurora operative system communicates with the related parts to proceed to data
processing.
This process ensures optimal performance levels of the whole units, as well as a
high efficiency under all solar radiation and load conditions, always in full
compliance with the applicable directives, standards and regulations.
Summary of Contents for AURORA PVI-6000-OUTD-AU Series
Page 16: ...Page 16 of 89 PVI 6000 OUTD xx AU Rev 1 0 Fig 3C Integrated switch and diodes models...
Page 39: ...Page 39 of 89 PVI 6000 OUTD xx AU Rev 1 0 Fig 18 Data Transmission Options...
Page 70: ...Page 70 of 89 PVI 6000 OUTD xx AU Rev 1 0...
Page 88: ...Page 88 of 89 PVI 6000 OUTD xx AU Rev 1 0 CERTIFICATE OF CONFORMITY...
