Page 14 of 89
(PVI-6000-OUTD-xx-AU Rev:1.0)
The total current of an array must also be within the capability limits of the
inverter. For AURORA, the limit is set at 18 Adc maximum for each input. The
AURORA model rated 6000W is capable of handling 2 separate arrays. The
maximum current limit for each input is 18Adc.
If the output of photovoltaic system exceeds the capacity of a single inverter,
additional AURORA inverters can be added to the system; each inverter will be
connected to an adequate section of the photovoltaic filed on the DC side and to
the grid on the AC side.
Each Aurora inverter will work independent of the others and will push to the grid
the maximum power available from its own section of the photovoltaic panels.
There are several factors and considerations to be taken into account when
designing a photovoltaic system, such as the type of panels, available room,
location, long-term target output, etc. The system configurator available on Power-
One's web site at www.power-one.com may help in sizing a photovoltaic system.
Fig.3 Simplified diagram of a photovoltaic system
DC disconnect switch
AC disconnect
switch
Summary of Contents for AURORA PVI-6000-OUTD-AU Series
Page 16: ...Page 16 of 89 PVI 6000 OUTD xx AU Rev 1 0 Fig 3C Integrated switch and diodes models...
Page 39: ...Page 39 of 89 PVI 6000 OUTD xx AU Rev 1 0 Fig 18 Data Transmission Options...
Page 70: ...Page 70 of 89 PVI 6000 OUTD xx AU Rev 1 0...
Page 88: ...Page 88 of 89 PVI 6000 OUTD xx AU Rev 1 0 CERTIFICATE OF CONFORMITY...
