Page 5 of 89
(PVI-6000-OUTD-xx-AU Rev:1.0)
GENERAL
During inverter operation, some parts can be powered, some not properly insulated
and, in some cases, some parts can move or rotate, or some surfaces be hot.
Unauthorized removal of the necessary protections, improper use, wrong
installation or wrong operation may lead to serious damage to people and objects.
Transport, handling, installation, commissioning and maintenance must be
performed by qualified and trained personnel (all accident prevention rules in force
in the user's country must be observed ! !!).
According to these basic safety rules, qualified and trained people have skills for
the assembling, start-up and operation of the product, as well as the necessary
requirements and qualifications to perform such operations.
ASSEMBLY
Devices shall be assembled and cooled according to the specifications mentioned
in the corresponding documents.
In particular, during transport and handling, parts shall not be bent and/or the
insulation distances shall not be changed. There should be no contact between
electronic parts and connection terminals.
Electrical parts must not be mechanically damaged or destroyed (potential health
risk).
ELECTRICAL CONNECTION
With the inverter powered, comply with all prevailing national regulations on
accidents prevention.
Electrical connections shall be carried out in accordance with the applicable
regulations, such as conductor sections, fuses, PE connection.
Summary of Contents for AURORA PVI-6000-OUTD-AU Series
Page 16: ...Page 16 of 89 PVI 6000 OUTD xx AU Rev 1 0 Fig 3C Integrated switch and diodes models...
Page 39: ...Page 39 of 89 PVI 6000 OUTD xx AU Rev 1 0 Fig 18 Data Transmission Options...
Page 70: ...Page 70 of 89 PVI 6000 OUTD xx AU Rev 1 0...
Page 88: ...Page 88 of 89 PVI 6000 OUTD xx AU Rev 1 0 CERTIFICATE OF CONFORMITY...
