Page 51 of 89
(PVI-6000-OUTD-xx-AU Rev:1.0)
4) Shows instant output voltage value and within/outside range status.
5) Shows instant output frequency value and within/outside range status.
6) If measured instant values of voltage (step 4) and frequency (step 5) are
outside the allowed range, the following screens are shown alternately
-
Next connections (screen 3)
- Vgrid (screen 4)
- Fgrid (screen 5)
7) Instant value of insulation resistance
5.5.2
Error messages
After the connection is established, the inverter runs a test cycle; if wrong data is
found, the cycle is interrupted and an error code is displayed. Please look up error
codes and their meaning in the table in section 5.4.
Until the error is rectified, the following screens are shown alternately:
Meas. Riso
………………………
..
In range
Fgrid
50.17 Hz
In range
Vgrid
197.8 V
In range
Type OUTD
Part No………
In range
S/N ………..……..
Firmware…………
……..
In range
ERROR
Code ……..
Summary of Contents for AURORA PVI-6000-OUTD-AU Series
Page 16: ...Page 16 of 89 PVI 6000 OUTD xx AU Rev 1 0 Fig 3C Integrated switch and diodes models...
Page 39: ...Page 39 of 89 PVI 6000 OUTD xx AU Rev 1 0 Fig 18 Data Transmission Options...
Page 70: ...Page 70 of 89 PVI 6000 OUTD xx AU Rev 1 0...
Page 88: ...Page 88 of 89 PVI 6000 OUTD xx AU Rev 1 0 CERTIFICATE OF CONFORMITY...
