Page 64 of 89
(PVI-6000-OUTD-xx-AU Rev:1.0)
2)
Contrast
: display light contrast
Available display light tones go from 0 to 9.
Press UP and DOWN to scroll numbers and then press ENTER to confirm.
3)
Buzzer:
key tone setting
Selecting:
ON : key tone on
OFF : key tone off
5.5.6.3 Service
Only installing staff can gain access to this function, which is password-protected
and dedicated code is supplied by Power-One.
5.5.6.4 New Password
This function is used to change the default password 0000.
To set your personal code, use the display keys as follows:
Use ENTER to move from one digit to the next (from left to right)
Use ESC to go back to the previous digit (from right to left)
Press ESC repeatedly to go back to the previous menus as described in
sect. 5.5.3
Press DOWN to scroll numbers backwards (from 9 to 0)
Press UP to scroll numbers from 0 to 9
5.5.6.5 Cash
This function is about energy output savings.
Name: set desired currency, using keys as usual. Default currency is Euro.
Val/KWh: it indicates the cost of 1 KWh expressed in set currency. Default setting
is 0.50 Euro.
Name EUR
Val/KWh 00.50
Summary of Contents for AURORA PVI-6000-OUTD-AU Series
Page 16: ...Page 16 of 89 PVI 6000 OUTD xx AU Rev 1 0 Fig 3C Integrated switch and diodes models...
Page 39: ...Page 39 of 89 PVI 6000 OUTD xx AU Rev 1 0 Fig 18 Data Transmission Options...
Page 70: ...Page 70 of 89 PVI 6000 OUTD xx AU Rev 1 0...
Page 88: ...Page 88 of 89 PVI 6000 OUTD xx AU Rev 1 0 CERTIFICATE OF CONFORMITY...
