Page 6
www.poolpro.com.au
5. RECOMMENDED WATER BALANCING
Consult your local Pool Pro Professional to correctly balance your pool water. Follow
instructions on the packaging of each chemical. Always add chemicals to water, never
add water to chemicals.
Recommended Values
To Increase Value
To Decrease Value
Test
Frequency
pH
Concrete: 7.2 – 7.6 Fibreglass/
Vinyl: 7.0 – 7.2
Add Pool Pro pH
Increaser (Soda Ash)
Add Pool Pro
Hydrochloric Acid
Weekly
Free
Chlorine
1 – 3ppm
Increase the chlorine
output on the chlorinator
unit
Add Pool Pro Chlorine
Out and decrease the
chlorine output on the
chlorinator unit
Weekly
T.A. (Total
Alkalinity)
Concrete: 80 – 150ppm
Fibreglass/Vinyl: 80 – 120ppm
Add Pool Pro pH Buffer
Add Pool Pro
Hydrochloric Acid
Fortnightly
Calcium
Hardness
Concrete: 250 – 300ppm
Fibreglass/Vinyl: 150 – 200ppm
Add Pool Pro Hardness
Raiser
Add Pool Pro Calcium
Remover
Fortnightly
Stabiliser
30 – 60ppm
Add Pool Pro Stabiliser or
Pool Pro Rapid Stabiliser
Contact your Pool
Pro Professional for
advice
Fortnightly
Salt
3000 – 3500ppm
Add Pool Pro Ultrafine or
Premium Pool Salt
Partially empty the
pool and refill it
Fortnightly
This is a guide only, does not constitute and should not be used as an alternative to specific professional
advice. Pool Pro and The POPS Group Pty Ltd accept no liability for any damage, loss or harm associated
with the use of this guide.
