Page 15
www.poolpro.com.au
10.
The LCD screen will display “Final check on all valves/lid positions”. Check all other
valves and lids on all equipment are in the correct position. Press the
shortcut
button to finish the cycle and return to the Main Screen.
13. MAIN MENU
To access the main menu, press the
button and press
or
to scroll through
the menu. Press
to select a menu option or press to exit the screen. If there
is no activity for more than 60 seconds in any screen, you will be taken back to the
Main Screen. After 10 minutes of no activity, the LCD screen will dim. Simply press any
button on the control panel to wake the screen. All menu items are:
1 Backwash
2 Brightness
3 Cell Cleaning
4 Chlor Boost
5 Chlor Setting
6 Clock/Timer
7 Contrast
8 Power/Mode
9 Pump Setting
10 Salt Test
11 Service Menu
12 Spa Mode
13 Winter/Blanket Mode
14 pH Control Mode
See Section 12.6 on pages 14-15 (SHORTCUT BUTTON: BACKWASH).
13.1 MAIN MENU: BACKWASH
13.2 MAIN MENU: BRIGHTNESS
This function adjusts the brightness of the LCD screen.
1.
Press the
button to enter the Main Menu. Press
or
to scroll through the
menu. Press
to select Brightness.
2.
Press
or
to adjust the brightness.
3.
Press
to save or press to exit without saving.
13.3 MAIN MENU: CELL CLEANING
This function helps to clean calcium build-up that can occur on the cell plates.
1.
Press the
button to enter the Main Menu. Press
or
to scroll through the
menu. Press
to select Cell Cleaning.
2.
Press
or
to adjust the frequency of the cell’s cleaning cycle.
3.
Press
to save or press to exit without saving.
In areas where the water’s calcium hardness is low (less than 200ppm) cleaning of the
cell may not be necessary. Where calcium levels exceed 200ppm, regular inspection of
the cell is necessary. Cleaning with Pool Pro Cell Cleaner may be necessary.
