Page 17
www.poolpro.com.au
See Section 12.5 on pages 13-14 (SHORTCUT BUTTON: SALT TEST).
13.10 MAIN MENU: SALT TEST
13.11 MAIN MENU: SERVICE MENU
This function shows details about your Neptune Chlorinator.
1.
Press the
button to enter the Main Menu. Press
or
to scroll through the
menu. Press
to select Service Menu.
2.
Press
or
to scroll through the following items: Model, Run Hours, Pool
Size, Internal Temperature, Polarity, Output, Mineral Type, Factory Defaults,
Software Version. Press
on each item to view more details. Press
to return
to the list of items.
3.
Press to return to the Main Menu. Press again to return to the Main Screen.
Contact your distributor or your local Pool Pro Professional for further information
regarding the Service Menu.
13.12 MAIN MENU: SPA MODE
This function allows you to adjust the settings for a spa.
1.
Press the
button to enter the Main Menu. Press
or
to scroll through the
menu. Press
to select Spa Mode.
2.
Press
or
to adjust the setting between ON or OFF.
ON
= 10% chlorine output.
OFF
= 100% chlorine output.
3.
Press
to save or press to exit without saving.
4.
The Main Screen will display “Mode: SPA” when this function is activated.
5.
Repeat these steps to turn off Spa Mode.
See Section 12.3 on page 12 (SHORTCUT BUTTON: WINTER/BLANKET).
13.13 MAIN MENU: WINTER/BLANKET
13.14 MAIN MENU: pH CONTROL MODE
This function allows you to use the Neptune pH Controller in conjunction with the
Neptune Digital Chlorinator. The default setting for this function is OFF.
To turn on the pH Control mode:
1.
Press the
button to enter the Main Menu. Press
or
to scroll through the
menu. Press
to select pH Control Mode.
