Page 9
www.poolpro.com.au
9. CONTROL PANEL OPERATION
BUTTON
FUNCTION
Sets the chlorinator’s operating mode between AUTO, ON and OFF.
This is displayed on the LCD screen next to “Mode”.
Sets the chlorinator and pump to operate for 8 hours at 100% output.
Defaults to 8 hours but can be modified.
Reduces the chlorine output to 50%. Defaults to 50% but can be modified.
Sets the clock (time of day) and the timer (chlorinator operating times).
Measures the salt level of the pool water. Also shows the salt value.
Runs a backwash process to clean the media inside the pool filter system.
- Enters the Main Menu if pressed when the LCD screen is displaying the
Main Screen (see section “Main Screen” on page 9).
- Saves any changes made to the settings.
- Scrolls up any menus.
- Adjusts values of any options selected.
- Scrolls down any menus.
- Adjusts values of any options selected.
- Exits menus.
- Returns to the previous screen.
Used during service by qualified Pool Pro Professionals.
IMPORTANT NOTES
After 60 seconds of inactivity in any
display, the display will return to the
Main Screen.
After 10 minutes of inactivity in any
display, the LCD screen will dim.
Simply press any button on the
control panel to wake the screen.
