Page 16
www.poolpro.com.au
See Section 12.2 on pages 11-12 (SHORTCUT BUTTON: CHLOR BOOST).
13.4 MAIN MENU: CHLOR BOOST
13.5 MAIN MENU: CHLOR SETTING
This function controls the chlorine output of the chlorinator. Used for running the pump
for longer hours (i.e. with a variable speed pump or for additional filtration).
1.
Press the
button to enter the Main Menu. Press
or
to scroll through the
menu. Press
to select Chlor Setting.
2.
Press
or
to adjust the chlorine output percentage.
3.
Press
to save or press to exit without saving.
See Section 12.4 on pages 12-13 (SHORTCUT BUTTON: CLOCK/TIMER).
13.6 MAIN MENU: CLOCK/TIMER
13.7 MAIN MENU: CONTRAST
This function adjusts the contrast of the LCD screen.
1.
Press the
button to enter the Main Menu. Press
or
to scroll through the
menu. Press
to select Contrast.
2.
Press
or
to adjust the contrast.
3.
Press
to save or press to exit without saving.
See Section 12.1 on page 11 (SHORTCUT BUTTON: POWER/MODE).
13.8 MAIN MENU: POWER/MODE
13.9 MAIN MENU: PUMP SETTING
This function protects the pool pump if there is no water flow. It adjusts the time that the
pump runs after the cell has detected that there is no water flow.
1.
Press the
button to enter the Main Menu. Press
or
to scroll through the
menu. Press
to select Pump Setting.
2.
Press
or
to adjust the off time of the pump (3-10 minutes). The “OFF”
option disables this feature so the pump will NOT be turned off when there is no
water flow. The “OFF” option is ideal for pools with a flow switch or an external
pump control.
3.
Press
to save or press to exit without saving.
