Page 27
www.poolpro.com.au
7:
Products sold by the manufacturer are designed for use with swimming pool water
balanced in accordance with the Langelier Saturation Index (AS 3633-1989) with a pH
range of 6.8-7.8. The chlorine level should not exceed 4ppm and the salt level should
not exceed 4500ppm.
8:
The manufacturer will not be held liable for damage caused by, but not limited to,
corrosion, scaling or stress.
9:
This warranty is applicable to workmanship and materials only.
10:
This warranty is not transferable under any circumstance.
11:
Extended periods to gain more chlorine production voids the Warranty.
12:
Keep your original purchase invoice and serial number in a safe place.
13:
Visit
www.poolpro.com.au/serviceclaim
to submit a warranty request.
The warranty is void under the following circumstances:
•
Installation is carried out incorrectly by any person other than a person authorised
by us to do so.
•
The Power Pack or Cell is serviced by any person other than a person authorised
by us to do so.
•
Correct salt levels are not maintained at all times.
•
The Power Pack is not protected from the elements.
•
The Power Pack is not operated in a position/area with good ventilation.
•
Water has been allowed to enter the Power Pack or Junction Box.
•
Insect infestation or penetration by dust, sand or other foreign particles inside the
Power Pack.
•
Damage beyond our control.
•
Equipment that has been misused, neglected, damaged, repaired without
authorisation or altered in any way.
Please register your product online at
www.poolpro.com.au/product-registration
within 30 days from date of purchase, or any warranty claim may be voided.
20. PRODUCT REGISTRATION
