Page 13
www.poolpro.com.au
2.
Press
to change between SINGLE CYCLE (chlorinator runs once per day) or
DUAL CYCLE (chlorinator runs twice per day).
3.
Press
to save the timer cycle and enter the timer program.
4.
To set the ON/START time for TIMER 1:
“TIMER 1: ON TIME” will display on the LCD screen. The hours will flash on the
LCD screen. Press
or
to adjust the hour. Press
to save. The minutes
will flash. Press
or
to adjust the minutes. Press
to save and continue
to Step 5, or press to go back to the hours and repeat Step 4. Press again
to exit without saving.
5.
To set the OFF/STOP time for TIMER 1:
“TIMER 1: OFF TIME” will display on the LCD screen. The hours will flash on the
LCD screen. Press
or
to adjust the hour. Press
to save. The minutes
will flash. Press
or
to adjust the minutes. Press
to save and continue
to Step 6, or press to go back to the hours and repeat Step 5. Press again
to exit without saving.
6.
If you chose SINGLE CYCLE, you will be taken back to the Main Screen.
If you chose DUAL CYCLE, continue to the next step.
7.
To set the ON/START time for TIMER 2:
“TIMER 2: ON TIME” will display on the LCD screen. The hours will flash on the
LCD screen. Press
or
to adjust the hour. Press
to save. The minutes
will flash. Press
or
to adjust the minutes. Press
to save and continue
to Step 8, or press to go back to the hours and repeat Step 7. Press again
to exit without saving.
8.
To set the OFF/STOP time for TIMER 2:
“TIMER 2: OFF TIME” will display on the LCD screen. The hours will flash on the
LCD screen. Press
or
to adjust the hour. Press
to save. The minutes
will flash. Press
or
to adjust the minutes. Press
to save and return to
the Main Screen or press to go back to the hours and repeat Step 8. Press
again to exit without saving.
12.5 SHORTCUT BUTTON: SALT TEST
This function measures the salt level in the pool water.
This function is a guide only.
Have your pool water tested by your local Pool Pro Professional in order to add correct
