Page 11
www.poolpro.com.au
The Main Screen displays the current
settings for the chlorinator.
Output
= The output percentage.
(●) symbol
= Normal operation.
T1 or T2
= “Single Timer Cycle” or “Dual
Timer Cycle” is selected.
Mode
= ON, OFF or AUTO.
HH:MM
= The time of day in 24 hour format.
Cell
= Cell status (FWD, REV or OFF).
Pump
= The status of the pool pump AC socket (ON or OFF).
Water Temp
= Pool water’s temperature.
11. THE MAIN SCREEN
Some of the menu items have shortcut buttons on the
touchpad, allowing quick access without going through
the main menu. The shortcut buttons are:
POWER/MODE CLOCK/TIMER
CHLOR BOOST
SALT TEST
WINTER/BLANKET
BACK WASH
NOTE: You must be on the Main Screen for the
shortcut buttons to function.
12. SHORTCUT BUTTONS
12.1 SHORTCUT BUTTON: POWER/MODE
This function changes the operating mode of the chlorinator. AUTO = running on the
timer settings. ON = manually running, not using the timer settings. OFF = not running
manually or on the timer settings.
1.
Press the
button to change between AUTO, ON and OFF.
2.
The mode can also be accessed via the main menu. Press the
button to enter
the Main Menu. Press
or
to scroll through the menu. Press
to select
Power/Mode.
3.
Press
or
to adjust the power/mode.
4.
Press
to save or press to exit without saving.
12.2 SHORTCUT BUTTON: CHLOR BOOST
This function sets the chlorinator and pump to operate for 8 hours at 100% output,
known as Chlor Boost or Superchlorination (extra sanitising time).
1.
Press the
shortcut button or enter Chlor Boost via the Main Menu.
