Polycom VIEWSTATION User Manual Download

Page: 109 / 250

Chapter 2

Optional Configurations

Polycom, Inc.

ViewStation User Guide

has been changed to prevent ambiguous or accidental
camera selection. A change to your room controller software
is required.

Security

The

Security

screen (

System Info > Admin Setup > Security

)

shown in Figure 2-59 is used to set the ViewStation passwords. Use
of passwords is not required for the ViewStation.

Figure 2-59. Security Screen for All Models Except V.35

Admin Password:

The admin password is used to grant or

restrict access to the administrative features of the ViewStation.

Meeting Password:

The meeting password is used to grant or

restrict access to the non-administrative features to the
ViewStation Web interface.

Software Update Password:

The purpose of the software

update password is to prevent accidental updating of the
ViewStation software from the far site. This password is
automatically entered by the ViewStation from the initial setup.
The software update password may be changed at any time.

Multi-Point Password:

A conference password is occasionally

required for a multi-point conference that uses a third-party MCU.

•

Text box

: If left blank, no multi-point password is selected.

If the text box is populated, the ViewStation uses this
password to connect to multi-point videoconferences.

Summary of Contents for VIEWSTATION



























































































































































































































































Search results

Summary of Contents for VIEWSTATION

Reviews:

Related manuals for VIEWSTATION

Brands by name

Popular brands

Polycom VIEWSTATION, User Manual

Search results

Summary of Contents for VIEWSTATION

Reviews:

Related manuals for VIEWSTATION

Brands by name

Popular brands