Polycom VIEWSTATION User Manual Download Page 195

Page: 195 / 250

Chapter 6

Troubleshooting

Polycom, Inc.

179

ViewStation User Guide

An echo is heard at the near site
when speaking.

Far site microphone pod is too close
to the audio speaker.

At the far site, make sure the
microphone pod is placed away
from the audio speaker.

The far site audio volume may be
too loud.

Turn down the audio volume at the
far site.

Near site or far site cannot hear
VCR audio or see the VCR
video.

VCR input is not selected.

Turn on the VCR input by selecting
the NEAR key twice and selecting
the

VCR

icon.

Local audio can be heard when
speaking in the microphone.

The monitor or audio amplifier is not
connected to the audio out of the
ViewStation.

Connect the monitor or audio
amplifier to the monitor audio out of
the ViewStation.

Symptom

Cause

Solution

Summary of Contents for VIEWSTATION



























































































































































































































































Search results

Summary of Contents for VIEWSTATION

Reviews:

Related manuals for VIEWSTATION

Brands by name

Popular brands

Polycom VIEWSTATION, User Manual

Search results

Summary of Contents for VIEWSTATION

Reviews:

Related manuals for VIEWSTATION

Brands by name

Popular brands