Polycom ReadiManager SE200 Operator'S Manual Download Page 58

Page: 58 / 72

Polycom ReadiManager SE200 Operator’s Guide

6–2

Figure 6-1

CDR Table - IP View Screen

Call ID

ID automatically generated for the call.

Conf ID

The GUID (global unique identifier) for the conference.

Date/Time

Date and time the call started, provided in local time for the
appliance.

Source

Name, IP, or alias of the device that originated the call.

Source Address

IP address of the device that originated the call.

Destination

Name, IP address, or alias of the device that received the
call.

Destination Address

IP address of the device that received the call.

Call Type

The type of call: scheduled or unscheduled.

Bandwidth (Kbps)

Bandwidth that was used for the call.

Duration (min)

Length of the call in minutes, up to a maximum of 999.

Q.850 Code

Standard cause code for call termination.

Note:

IP calls through the Global Address Book that are not registered to the

gatekeeper do not display in the CDR Table - IP View screen.

Table 6-1

Information in the CDR Table - IP View Screen

Column

Description

Summary of Contents for ReadiManager SE200









































































Search results

Summary of Contents for ReadiManager SE200

Reviews:

Related manuals for ReadiManager SE200

Brands by name

Popular brands

Polycom ReadiManager SE200, Operator'S Manual

Search results

Summary of Contents for ReadiManager SE200

Reviews:

Related manuals for ReadiManager SE200

Brands by name

Popular brands