Polycom ReadiManager SE200 Operator'S Manual Download Page 44

Page: 44 / 72

Polycom ReadiManager SE200 Operator’s Guide

5-6

Figure 5-3

Device Information Tab

Capabilities

ISDN Assignment
Type

Indicates how the ISDN number shown as the video
number in the device list was assigned to this device.
Options are:

•

Administrator.

Assigned by the ReadiManager

Administrator.

•

Endpoint.

Native for the device.

•

Auto-Assigned.

Assigned by ReadiManager based on

the site configuration.

•

From Network.

Derived from the gateway and the

extension.

Endpoint ISDN
Type

If the ISDN Assignment Type is Endpoint, indicates the
kind of ISDN line type. Options are:

•

BRI

•

PRI

Table 5-2

Fields in the Device Status Tab (continued)

Field Description

Table 5-3

Fields in the Device Information Tab

Field Description

Device Info

Product ID

The product identifier by which the device is known to the
gatekeeper.

Version

Version of the software in the device.

Serial Number

Serial number of the device.

System Name

System name as specified by the device. Same as the
device name.

Summary of Contents for ReadiManager SE200









































































Search results

Summary of Contents for ReadiManager SE200

Reviews:

Related manuals for ReadiManager SE200

Brands by name

Popular brands

Polycom ReadiManager SE200, Operator'S Manual

Search results

Summary of Contents for ReadiManager SE200

Reviews:

Related manuals for ReadiManager SE200

Brands by name

Popular brands